An Interview with Dennis Hoff

by: Noah Graff

Hoff-Hilk Auction Services Dennis Hoff

Dennis Hoff is president of Hoff-Hilk Auction Services, an online auction company which sells commercial and industrial machinery exclusively. Before starting Hoff-Hilk, Dennis was a used machinery dealer and machine tool appraiser for over 35 years.

NG: Do you think outcry auctions are becoming obsolete?
DH: I think they’re becoming less of a player. I don’t think they’ll ever go away. We’ve had some instances where we’ve been asked to do that type of sale and in some cases it’s appropriate.

NG: How are online auctions superior to traditional auctions?
DH: You’re in Minneapolis; we had a snowstorm last night, it’s 17 degrees and most of the streets are plowed. I would say that if you had a live sale, you would’ve had 50 percent less people than you would on a regular day. I think selling to the world as opposed to people standing on the floor makes a big difference.

NG: What’s your opinion of eBay?
DG: I’m not a big eBay fan from the seller standpoint because I don’t think that they do a good job describing the machines. We try to work harder; to clean the machines better; to take more videos and take more pictures. Recently at the Bystrom Bros. sale, we took 48,000 photographs for about 3,500-3,600 lots.

NG: Do you think most buyers and sellers feel that auctions are “fair”?
DH: Probably not. I think it’s very hard to be transparent in the auction business, which we try very hard to do. But no, I would think that most of them are not as comfortable as they’d like to be.

NG: What type of auctions do you prefer to do?
DH: We don’t have a preference. We’re very frank with the sellers, and we’ll tell them that the worst thing they can do is have us buy it. We’ll make the most money that way. The best thing for them is to have us work on a commission basis on their behalf.

NG: Are sellers sometimes bitter and depressed that they’re liquidating? Do you have to play psychologist?
DH: Absolutely, it’s a huge part of the business. Especially for what we call “site” coordinators that set up the sale. They have to be dealing with that person on a day-to-day basis. They see them every single day moping in, and they see their attitude get worse the closer we get to the day of the sale.

NG: Did you say “Psych” coordinator?
DH: “Site” coordinator. It could be “psych” though. (laugh)

NG: What’s your favorite part of your job?
DH: I think looking at the deal and trying to figure [out] the deal. There’s always that excitement; the hunt is a lot better than the kill.

NG: What’s the thing you hate most about your job?
DH: Probably dealing with the psychology of the owner, that his life is kind of ending. For small business people, myself included, this is a big part of our lives. You can be a golf nut; you can like to boat; you can like to fish; but I think anybody who owns a small business, you get up and you go to work everyday. That’s your life. Even those people who are coming out on top, they still have issues. They want to go and smell that oil on Monday morning and there’s no place to go and smell it.

Leave a Reply

Maier

Classifieds

Hydromat Boston Centerless Alliance Medvec Resources Group Trusty Cook Etco Partmaker Machine Tools

From the Experts

Mark Bos

Making parts faster doesn’t always mean cheaper
Mark Bos

By Mark Bos
In today’s difficult economy, we are all trying to make parts faster and cheaper. Unfortunately, making parts faster is sometimes at odds with making them cheaper.
I have learned [...]

Dave Johnson

Shop Doc – Should I rebuild my Acme?
Dave Johnson

Dear Shop Doc,
My Acme-Gridley screw machines have been real money makers over the years, but all that production takes its toll in wear and tear on the machines. Will I [...]

dcogswell

Shop Doc: Bent Logo
David Cogswell

Todays’ Machining World Archives March 2008 Volume 04 Issue 03
Dear Shop Doc,
We are trying to stamp our company logo on components produced on our CNC Swiss type machines. In the [...]

dmurphy

Shop Doc – Custom Macro programming
Dan Murphy

Today’s Machining World Archives August 2010 Volume 06 Issue 06
Dear Shop Doc,
One of our operators came from another shop and told us that we can use Custom Macro for tool [...]

Flavio Rovertoni

Shop Doc – When to go Hydromat
Flavio Rovertoni

Dear Shop Doc,
We are a new job shop looking to add some equipment. We are wondering whether we should invest in used rotary transfer machines like a Hydromat Legacy or [...]

jesse

Shop Doc – Justifying Use of a High-Speed-Spindle
Jesse Xi Chen

Dear Shop Doc,
We have often heard the high speed machine spindle is expensive and has to be replaced at some point. Can you shed some light on the high speed [...]

pbagswell

Shop Doc – Micro Beginnings
Peter Bagwell

Dear Shop Doc,
I have recently been asked if my shop does “micro” machining. I’ve done some work on small
parts recently, but I’m not exactly sure what is meant by “micro.” [...]